The slab work that goes into a bathroom does not stop at the bathroom door. The surfaces are the part of a kitchen remodeling job people actually touch and look at. Cooktop walls, countertops and full-height feature walls are cut from the same large-format porcelain, book-matched so the veining runs straight through, and mitred at the edges so no trim shows.
A tiled backsplash puts a grout joint every few inches, and the joints directly behind a cooktop are where grease and steam end up. A single porcelain panel has no joints to scrub and no pattern breaks across the wall. It wipes down in one pass.
Porcelain slab, sometimes sold as sintered stone, is fired and effectively non-porous. Unlike natural marble it does not need sealing, it does not stain from oil or wine, and it takes heat without marking, which matters directly behind a hob.
Book-matching means adjacent panels are cut so the veining mirrors across the join, and the eye reads the wall as one piece of stone rather than as separate sheets. It only works if the slabs are laid out and cut in sequence, before anything goes on the wall, which is why it has to be planned rather than decided on the day.
The same applies where a counter turns down at the end. A mitred waterfall edge carries the pattern over the corner with no visible thickness, so the counter reads as solid stone instead of a laminated panel.
A full-height panel behind the hob is the single change that most alters how a kitchen reads. It removes the horizontal break where a tiled splashback normally stops, and it gives the room one continuous surface from counter to ceiling. Where an extractor passes through, the cut is templated so the opening sits square to the veining rather than wherever the joint happened to fall.
The same fabrication covers TV walls, fireplace surrounds, and exterior cladding on columns and facades. If a surface can be measured and templated, it can be cut from slab.
We are not a cabinet shop. On a kitchen remodeling project we are the surfaces trade, not the cabinet maker. We do not build or fit cabinetry and we do not supply appliances. We handle the hard surfaces: the walls, the counters and the fabrication around them. Where a kitchen needs cabinets too, we work to the cabinet maker's dimensions and set our surfaces around them.
Every kitchen remodeling job starts the same way. We look at the space, template it, and put a written scope and a fixed price in front of you before anything starts. One crew does the work through to the final clean, floors covered and the site swept at the end of each day.
Most of our work is bathrooms, and the same standards apply there: see custom porcelain slab sinks or how we waterproof a shower. To talk about a kitchen, start a chat and tell us the room size and what is going where.
We work across South Florida. Recent kitchens and bathrooms have been in Hollywood, Hallandale Beach, Aventura, Golden Beach, Pompano Beach and Boca Raton, so Miami-Dade, Broward and southern Palm Beach are all normal for us. If you are close to those and not sure, ask in the chat and we will tell you straight away rather than waste your time.